A Pack-and-Play protector has to match the original pad and stay completely flat. These two fitted Biloban options use quilted four-layer construction and TPU backing, but their stated dimensions differ—and one has a direct too-large fit report.
Best 39-by-27 Pick
Best Two-Pack
Our Pack-and-Play Protector Picks
| Pick | Stated size | Pack | |
|---|---|---|---|
| Biloban 39-by-27 | 39 x 27 inches | Up to 5 inches | Verify current listing |
| Biloban two-pack | 38 x 26 inches, with conflicting 38 x 24 wording | Up to 5 inches | 2 |
Neither product replaces the manufacturer-supplied playard pad. Use a protector only if the playard instructions allow it and the installed cover stays taut. Review the Pack-and-Play mattress safety guide before adding any third-party layer.
Biloban 39-by-27 Pack-and-Play Mattress Protector
1 / 2
Biloban 39-by-27 Pack-and-Play Mattress Protector
Size
39 x 27 inches
Up to 5 inches
Surface
Microfiber
Fill
Quilted fiber
Barrier
TPU backing
Construction
Four layers
Care
Machine wash and dryer friendly
This fitted cover uses microfiber, absorbent quilted fill, a moisture-wicking layer, and TPU backing. Its stretch skirt is listed for 39-by-27-inch surfaces up to 5 inches deep.
No distinct owner reports are available for this exact variant. Fit, quietness, waterproofing, and long-term wash durability therefore come from listing claims rather than owner experience. Treat “compatible with” model names as a starting point and measure the actual original pad.
Why It Works
- The 39-by-27-inch target is clearly stated.
- A fitted skirt wraps around surfaces up to 5 inches deep.
- Four layers combine absorbency and TPU backing.
- The cover is listed for machine washing and drying.
What To Keep In Mind
- No distinct owner reports support the current variant.
- A 5-inch pocket may be loose on a thin playard pad.
- Listing compatibility is not manufacturer approval.
- Do not rely on the “300+ cycles” marketing claim as a guarantee.
Biloban 38-by-26 Two-Pack
2 / 2
Biloban 38-by-26 Two-Pack
Primary stated size
38 x 26 inches
Conflicting wording
Also references 38 x 24
Up to 5 inches
Surface
Micropeach polyester
Barrier
TPU
Construction
Four layers
Pack
2
Care
Machine wash and dry
The two-pack uses a micropeach polyester surface, fiber fill, TPU barrier, and nonwoven backing. Keeping a second protector ready can shorten an overnight bedding change.
Fit is the concern. The listing centers on 38 by 26 inches but also mentions 38-by-24-inch mini and portable crib mattresses. One product-specific reviewer found it much too large for a standard Graco Pack 'n Play pad and unsuitable for unsupervised sleep. Use it only if the exact selected dimensions match, the playard maker permits the cover, and it lies flat with no bunching.
Why It Works
- Two pads support a laundry rotation.
- The TPU layer sits beneath an absorbent quilted top.
- A fitted skirt is easier to remove than an encasement.
- Machine washing and drying are listed.
What To Keep In Mind
- The listing contains conflicting size language.
- A direct report says it was too large for a Graco pad.
- Remove it if any edge lifts or surface wrinkles.
- Quilting must not become added cushioning.
How to Choose
Measure the original pad's length, width, and depth. Do not measure the playard's outside frame. Compare the result with the exact selected variant, then wash and reinstall the protector before use. If it shifts, wrinkles, or pulls the pad out of shape, remove it.
Read do you need a Pack-and-Play protector and the protector fit guide before choosing. The pad-versus-protector guide explains why extra quilted thickness should remain minimal.
For laundry, follow the sewn-in label and avoid heat or additives that can damage TPU. See how to wash a crib mattress protector and waterproof protector drawbacks for barrier care and noise tradeoffs.
Frequently Asked Questions
Can either protector replace the Pack-and-Play pad?
No. These are covers only and do not replace the manufacturer-supplied pad.
Which option includes two protectors?
The selected 38-by-26-inch Biloban listing is a two-pack.
Why is exact sizing important?
Excess fabric can bunch or lift, while an undersized protector can distort the original pad.
Does “fits Graco” guarantee compatibility?
No. Graco makes different products, and the controlling playard instructions plus exact pad dimensions still apply.
What is the size conflict on the two-pack?
The listing names a 38-by-26-inch protector but also references 38-by-24-inch surfaces.
Are these thick replacement mattresses?
No. They are quilted fitted protector pads.
What if the protector is loose after washing?
Do not use it on the sleep surface. Recheck the variant and dimensions.
Compare waterproof playard mattress pads and mini crib mattress protectors for nearby but distinct sizes.
